PADiT Breathable Felt Self-Adhesive Surface Protection
- Brand:
PAD-iT
Self-adhesive breathable felt for painting and decorating — 0.915 m x 50 m
A 160gsm felt roll for painters, decorators and renovators. Roll it onto timber, tile, stairs or benchtops before you start and it stays put without tape, then lifts off clean when the job's finished.
The top layer is waterproof, so paint, plaster and water spills sit on the felt instead of soaking through. The backing breathes, so moisture can escape and the floor underneath won't sweat or stain the way it can under plastic sheeting. The surface is anti-slip for working off ladders and walking around the room.
Scuff guard under sheet protection
On bigger jobs, lay the felt down first and put MDF or ply sheets over the top. The felt stops the sheets scuffing and scratching the finished floor as they move under foot traffic.
Good for
- Painting and decorating
- Renovation and maintenance work
- Stairs and nosings — it moulds to edges
- Benchtops, cabinetry and joinery
- Underlay beneath MDF or ply sheets
For impact protection on full construction sites, use PAD-iT foam rolls.
Don't use on
Curing concrete, freshly coated or uncured floor finishes, or heated floors while the heating is on.
Specifications
| Weight | 160gsm |
| Roll size | 0.915 m x 50 m |
| Coverage | about 45.75 m² per roll |
| Backing | Self-adhesive |
| Surface | Waterproof, breathable, anti-slip |
| Reuse | Can be lifted and re-laid |
For a sample or more information, contact us.